Error code · Microwave & Advantium

Monogram Advantium Message “Control is LOCKED”

Low risk · DIY check OK

Code: Control Panel LOCKED
Appliance: Microwave & Advantium
Brand: Monogram
Warranty: 30-day workmanship

What Control Panel LOCKED means

On Monogram Advantium ovens, such as the ZSC2200, ZSC2201, ZSC2202 and ZSC1202, the display shows that the control is locked when the lockout feature has been turned on. Nothing is broken. The control is simply ignoring cooking pads so that children or a stray touch cannot start the oven. You will see the lock message when you press a pad, and the oven will not respond until the lock is released.

Common causes of Control Panel LOCKED

Lockout turned on by a long press
Pad pressed and held during cleaning
Child lock set earlier and forgotten
Panel touched while wiping it down

✓ One safe check you can try

1. Press and hold the CANCEL/OFF pad for 5 seconds. 2. Wait for the lock message to clear from the display. 3. Start your cooking program as usual. 4. If the pad will not unlock it, tell us your model number.

! Why to stop there

If CANCEL/OFF does not release the lock, we test the pad and the panel connection.
A lock that returns on its own points to a pad being held down, which we check.
We give a written price first and a 30-day workmanship warranty.

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Microwave & Advantium codes

Abnormal High TempMonogram Advantium 240 Code Abnormal High Temp: cavity hotter than the setting DEMO ModeMonogram Advantium 240 Mode DEMO: Showroom Setting Active Lower Thermal Sensor OPENMonogram Advantium 240 Code Lower Thermal Sensor OPEN: bottom sensor disconnected Lower Thermal Sensor SHORTEDMonogram Advantium 240 Code Lower Thermal Sensor SHORTED: bottom sensor shorting out Humidity Sensor OPENMonogram Advantium 240 Code Humidity Sensor OPEN: moisture sensor circuit broken F1Monogram Advantium 120 Code F1: cavity thermistor reads open F2Monogram Advantium 120 Code F2: thermistor in the cavity is shorted F3Monogram Advantium 120 Code F3: key panel circuit shorted

Control Panel LOCKEDControl Panel LOCKED questions

How do I unlock the Advantium control?

Press and hold CANCEL/OFF for 5 seconds. The message should clear and the pads will work again.

Is the lock a malfunction?

No. It is a feature that stops accidental starts, and it was switched on by a long press.

What if holding the pad does nothing?

Then the pad or panel may not be responding. We test it and quote the price in writing.

Book a visit

Still unsure about Control Panel LOCKED?

A technician diagnoses it on site and gives you the price in writing before any work starts.

(713) 955-0955